http://www.sqlis.com/sqlis/post/The-Execute-SQL-Task.aspx
In this article we are going to take you through the Execute SQL Task in SQL Server Integration Services for SQL Server 2005 (although it appies just as well to SQL Server 2008). We will be covering all the essentials that you will need to know to effectively use this task and make it as flexible as possible. The things we will be looking at are as follows:
- A tour of the Task.
- The properties of the Task.
After looking at these introductory topics we will then get into some examples. The examples will show different types of usage for the task:
- Returning a single value from a SQL query with two input parameters.
- Returning a rowset from a SQL query.
- Executing a stored procedure and retrieveing a rowset, a return value, an output parameter value and passing in an input parameter.
- Passing in the SQL Statement from a variable.
- Passing in the SQL Statement from a file.
Tour Of The Task
Before we can start to use the Execute SQL Task in our packages we are going to need to locate it in the toolbox. Let's do that now. Whilst in the Control Flow section of the package expand your toolbox and locate the Execute SQL Task. Below is how we found ours.
Now drag the task onto the designer. As you can see from the following image we have a validation error appear telling us that no connection manager has been assigned to the task. This can be easily remedied by creating a connection manager. There are certain types of connection manager that are compatable with this task so we cannot just create any connection manager and these are detailed in a few graphics time.
Double click on the task itself to take a look at the custom user interface provided to us for this task. The task will open on the general tab as shown below. Take a bit of time to have a look around here as throughout this article we will be revisting this page many times.
Whilst on the general tab, drop down the combobox next to the ConnectionType property. In here you will see the types of connection manager which this task will accept.
As with SQL Server 2000 DTS, SSIS allows you to output values from this task in a number of formats. Have a look at the combobox next to the Resultset property. The major difference here is the ability to output into XML.
If you drop down the combobox next to the SQLSourceType property you will see the ways in which you can pass a SQL Statement into the task itself. We will have examples of each of these later on but certainly when we saw these for the first time we were very excited.
Next to the SQLStatement property if you click in the empty box next to it you will see ellipses appear. Click on them and you will see the very basic query editor that becomes available to you.
Alternatively after you have specified a connection manager for the task you can click on the Build Query button to bring up a completely different query editor. This is slightly inconsistent.
Once you've finished looking around the general tab, move on to the next tab which is the parameter mapping tab. We shall, again, be visiting this tab throughout the article but to give you an initial heads up this is where you define the input, output and return values from your task. Note this is not where you specify the resultset.
If however you now move on to the ResultSet tab this is where you define what variable will receive the output from your SQL Statement in whatever form that is.
Property Expressions are one of the most amazing things to happen in SSIS and they will not be covered here as they deserve a whole article to themselves. Watch out for this as their usefulness will astound you.
For a more detailed discussion of what should be the parameter markers in the SQL Statements on the General tab and how to map them to variables on the Parameter Mapping tab see Working with Parameters and Return Codes in the Execute SQL Task.
Task Properties
There are two places where you can specify the properties for your task. One is in the task UI itself and the other is in the property pane which will appear if you right click on your task and select Properties from the context menu. We will be doing plenty of property setting in the UI later so let's take a moment to have a look at the property pane. Below is a graphic showing our properties pane.
Now we shall take you through all the properties and tell you exactly what they mean. A lot of these properties you will see across all tasks as well as the package because of everything's base structure The Container.
BypassPrepare
Should the statement be prepared before sending to the connection manager destination (True/False)
Connection
This is simply the name of the connection manager that the task will use. We can get this from the connection manager tray at the bottom of the package.
DelayValidation
Really interesting property and it tells the task to not validate until it actually executes. A usage for this may be that you are operating on table yet to be created but at runtime you know the table will be there.
Description
Very simply the description of your Task.
Disable
Should the task be enabled or not? You can also set this through a context menu by right clicking on the task itself.
DisableEventHandlers
As a result of events that happen in the task, should the event handlers for the container fire?
ExecValueVariable
The variable assigned here will get or set the execution value of the task.
Expressions
Expressions as we mentioned earlier are a really powerful tool in SSIS and this graphic below shows us a small peek of what you can do. We select a property on the left and assign an expression to the value of that property on the right causing the value to be dynamically changed at runtime.
One of the most obvious uses of this is that the property value can be built dynamically from within the package allowing you a great deal of flexibility
FailPackageOnFailure
If this task fails does the package?
FailParentOnFailure
If this task fails does the parent container? A task can he hosted inside another container i.e. the For Each Loop Container and this would then be the parent.
ForcedExecutionValue
This property allows you to hard code an execution value for the task.
ForcedExecutionValueType
What is the datatype of the ForcedExecutionValue?
ForceExecutionResult
Force the task to return a certain execution result. This could then be used by the workflow constraints. Possible values are None, Success, Failure and Completion.
ForceExecutionValue
Should we force the execution result?
IsolationLevel
This is the transaction isolation level of the task.
IsStoredProcedure
Certain optimisations are made by the task if it knows that the query is a Stored Procedure invocation. The docs say this will always be false unless the connection is an ADO connection.
LocaleID
Gets or sets the LocaleID of the container.
LoggingMode
Should we log for this container and what settings should we use? The value choices are UseParentSetting, Enabled and Disabled.
MaximumErrorCount
How many times can the task fail before we call it a day?
Name
Very simply the name of the task.
ResultSetType
How do you want the results of your query returned? The choices are ResultSetType_None, ResultSetType_SingleRow, ResultSetType_Rowset and ResultSetType_XML.
SqlStatementSource
Your Query/SQL Statement.
SqlStatementSourceType
The method of specifying the query. Your choices here are DirectInput, FileConnection and Variables
TimeOut
How long should the task wait to receive results?
TransactionOption
How should the task handle being asked to join a transaction?
Usage Examples
As we move through the examples we will only cover in them what we think you must know and what we think you should see. This means that some of the more elementary steps like setting up variables will be covered in the early examples but skipped and simply referred to in later ones. All these examples used the AventureWorks database that comes with SQL Server 2005.
Returning a Single Value, Passing in Two Input Parameters
So the first thing we are going to do is add some variables to our package. The graphic below shows us those variables having been defined. Here the CountOfEmployees variable will be used as the output from the query and EndDate and StartDate will be used as input parameters. As you can see all these variables have been scoped to the package. Scoping allows us to have domains for variables. Each container has a scope and remember a package is a container as well. Variable values of the parent container can be seen in child containers but cannot be passed back up to the parent from a child.
Our following graphic has had a number of changes made. The first of those changes is that we have created and assigned an OLEDB connection manager to this Task ExecuteSQL Task Connection. The next thing is we have made sure that the SQLSourceType property is set to Direct Input as we will be writing in our statement ourselves. We have also specified that only a single row will be returned from this query. The expressions we typed in was:
SELECT COUNT(*) AS CountOfEmployees FROM HumanResources.Employee WHERE (HireDate BETWEEN ? AND ?)
Moving on now to the Parameter Mapping tab this is where we are going to tell the task about our input paramaters. We Add them to the window specifying their direction and datatype. A quick word here about the structure of the variable name. As you can see SSIS has preceeded the variable with the word user. This is a default namespace for variables but you can create your own. When defining your variables if you look at the variables window title bar you will see some icons. If you hover over the last one on the right you will see it says "Choose Variable Columns". If you click the button you will see a list of checkbox options and one of them is namespace. after checking this you will see now where you can define your own namespace.
The next tab, result set, is where we need to get back the value(s) returned from our statement and assign to a variable which in our case is CountOfEmployees so we can use it later perhaps. Because we are only returning a single value then if you remember from earlier we are allowed to assign a name to the resultset but it must be the name of the column (or alias) from the query.
A really cool feature of Business Intelligence Studio being hosted by Visual Studio is that we get breakpoint support for free. In our package we set a Breakpoint so we can break the package and have a look in a watch window at the variable values as they appear to our task and what the variable value of our resultset is after the task has done the assignment. Here's that window now.
As you can see the count of employess that matched the data range was 2.
Returning a Rowset
In this example we are going to return a resultset back to a variable after the task has executed not just a single row single value. There are no input parameters required so the variables window is nice and straight forward. One variable of type object.
Here is the statement that will form the soure for our Resultset.
select
p.ProductNumber, p.name, pc.Name as ProductCategoryName
FROM Production.ProductCategory pc
JOIN Production.ProductSubCategory psc
ON pc.ProductCategoryID = psc.ProductCategoryID
JOIN Production.Product p
ON psc.ProductSubCategoryID = p.ProductSubCategoryID
We need to make sure that we have selected Full result set as the ResultSet as shown below on the task's General tab.
Because there are no input parameters we can skip the parameter mapping tab and move straight to the Result Set tab. Here we need to Addour variable defined earlier and map it to the result name of 0 (remember we covered this earlier)
Once we run the task we can again set a breakpoint and have a look at the values coming back from the task. In the following graphic you can see the result set returned to us as a COM object. We can do some pretty interesting things with this COM object and in later articles that is exactly what we shall be doing.
Return Values, Input/Output Parameters and Returning a Rowset from a Stored Procedure
This example is pretty much going to give us a taste of everything. We have already covered in the previous example how to specify the ResultSet to be a Full result set so we will not cover it again here. For this example we are going to need 4 variables. One for the return value, one for the input parameter, one for the output parameter and one for the result set. Here is the statement we want to execute. Note how much cleaner it is than if you wanted to do it using the current version of DTS.
In the Parameter Mapping tab we are going to Add our variables and specify their direction and datatypes.
In the Result Set tab we can now map our final variable to the rowset returned from the stored procedure.
It really is as simple as that and we were amazed at how much easier it is than in DTS 2000.
Passing in the SQL Statement from a Variable
SSIS as we have mentioned is hugely more flexible than its predecessor and one of the things you will notice when moving around the tasks and the adapters is that a lot of them accept a variable as an input for something they need. The ExecuteSQL task is no different. It will allow us to pass in a string variable as the SQL Statement. This variable value could have been set earlier on from inside the package or it could have been populated from outside using a configuration. The ResultSet property is set to single row and we'll show you why in a second when we look at the variables. Note also the SQLSourceType property. Here's the General Tab again.
Looking at the variable we have in this package you can see we have only two. One for the return value from the statement and one which is obviously for the statement itself.
Again we need to map the Result name to our variable and this can be a named Result Name (The column name or alias returned by the query) and not 0.
The expected result into our variable should be the amount of rows in the Person.Contact table and if we look in the watch window we see that it is.
Passing in the SQL Statement from a File
The final example we are going to show is a really interesting one. We are going to pass in the SQL statement to the task by using a file connection manager. The file itself contains the statement to run. The first thing we are going to need to do is create our file connection mananger to point to our file. Click in the connections tray at the bottom of the designer, right click and choose "New File Connection"
As you can see in the graphic below we have chosen to use an existing file and have passed in the name as well. Have a look around at the other "Usage Type" values available whilst you are here.
Having set that up we can now see in the connection manager tray our file connection manager sitting alongside our OLE-DB connection we have been using for the rest of these examples.
Now we can go back to the familiar General Tab to set up how the task will accept our file connection as the source.
All the other properties in this task are set up exactly as we have been doing for other examples depending on the options chosen so we will not cover them again here.
We hope you will agree that the Execute SQL Task has changed considerably in this release from its DTS predecessor. It has a lot of options available but once you have configured it a few times you get to learn what needs to go where. We hope you have found this article useful.
No comments:
Post a Comment