SSIS: Exporting data to a Dynamic text file using a package

http://decipherinfosys.wordpress.com/2008/07/23/ssis-exporting-data-to-a-text-file-using-a-package/

1. Creation of a new variable:

To create a new variable right click on the control flow pane and click on the Variables option. This will show the Variables window on the left. Create a new variable ‘FileLocation’ at the package level. We are going to make use of this variable to specify the location of the destination text file. We are going to make use of the location C:\SSIS in our example. The following image shows the creation of the variable.

2. Exporting the Data into the text using Data Flow Task:

Our next task is to define the data flow task which exports the data from the database into the text file pointed by the location in the variable FileLocation. Drag and drop the Data Flow Task from the Control Flow Tool Box into the Control Flow Designer. Double clicking on it will automatically take us to the Data Flow Tab of the SSIS Designer.

3.1 Configuring the Source in the Data Flow task:

On the Data Flow tab, drag and drop the “OLE DB Source” from the Data Flow Sources in the Data Flow Tool Box. Double click on the task which opens up the editor for the OLE DB Source. Create the new OLE DB source connection manager by clicking on “New” button on the OLE DB Source Editor. The creation of the connection managers has been dealt with in detail in the earlier posts. The data access mode option in the OLE DB source editor gives us various options of retrieving the data from the database. The image below shows the various options available to retrieve the data from the database.

The various options available are:

1. Table or View:

This option allows us to choose a database table from which we are going to export the data. This option is useful only when we are retrieving the data from single table or view only.

2. Table Name or View Name Variable:

This option enables us to pass the table or view name as a variable into the SSIS Package. Again this option is useful only when we are retrieving the data from single table or view only.

3. Sql Command:

This option allows us to specify the SQL Command (even a stored procedure) to retrieve the data from the database. This is the most viable option for us to use. Since we are retrieving the data from multiple tables inside the database, we are going to make use of this option.

4. Sql Command from Variable:

This option is very similar to the above one except that we can pass the sql command through a variable.

Choose Sql Command option in the Data Access Mode in the OLE DB Source Editor. It will display the space to write the sql command. Copy the sql command provided earlier in this post and paste it in here. One can use the Build Query option also to build the query. Clicking this opens a GUI to define the tables to retrieve the data from. The image below shows the configured OLE DB Source Transform in SSIS. Click OK to return to the data flow designer pane.

3.2 Configuring the Destination in the Data Flow task:

The next step in our task is to configure the destination for the data to be exported. On the Data Flow tab, drag and drop the “Flat File Destination” from the Data Flow Destinations in the Data Flow Tool Box. Drag the path (green arrow) from the OLE DB Source and join to the Flat File source . Double click on the task which opens up the editor for the Flat File Destination.

Click on New to create the New Flat File Destination Connection Manager. It will open up a dialog which asks us to select if the destination data is delimited or if the data is of fixed filed length. In our example, we will choose the Delimited option.

The image below shows the configuration of connection manager of Flat File Destination.

Click on OK and SSIS will open up the GUI for configuring the connection manager for the Flat File Destination. Rename the Connection Manager Name if required and for the File Name Option, click browse and give the destination file name. For the purpose of our example, we are using the file at C:\SSIS\orders.txt. The following image shows the configuration of Flat File Connection Manager.

Click on Open to go back to the connection Manager.

We have an option to choose the delimiter for the header row in this General Page. Choose the New Line delimiter ({CR}/{LF}) option for our example. Check the ‘Column names in the first row’ if the column names are required in the first row. In this example we are checking this option since we require the column names in the output flat file.

The following image shows the General Page of the Flat File Connection Manager.

Open up the Columns Page on the Left hand side. Here we can choose the row and the column delimiter for the text file. For our example, choose the New Line as the row delimiter and the Tab{T} as the column delimiter. Click OK to go back to the Flat File Destination.

The following image shows the Columns page of the Flat File Connection Manager.

Navigate to the Mappings page on the Flat File Destination Editor and map the source columns to the destination columns. The following image shows the Source and Destination Column Mappings.

The following image shows the Data Flow task after the configuration of the source and the destination.

The following image shows the entire package for exporting the data in the database to the text file.

Execute the package by hitting F5. The executables will turn green indication the successful execution of the package. We can to go the location C:\SSIS and see that the flat file orders.txt is indeed created with the retrieved data from the database.

Now we fulfilled part of our task of exporting the data from the database to the text file. But the issue here is the name of the text file is static. Every time we run this package will overwrite the destination text file which is not what we want. Ideally, we would like to create the text file with the name CustomerOrders_<mmddyyyy_HHMMSS> or something similar to it. This means that we have to create the file name dynamically.

To do this let us go back to the control flow task and add the Script Task to our package. The configuration of the Script Task has been discussed in the earlier posts. In the script task editor, in the Script Page specify the ReadWriteVariables as FileLocation. We are going to make use of this variable to generate the full file name of our destination file. Open up the Script editor by clicking on the Design Script button on the Script Task Editor. This will open up the visual studio where we write the code to generate the file name. Copy and paste the following code to generate the new file name for our destination file based on the format described earlier.

Dts.Variables(“User::FileLocation”).Value = Dts.Variables(“User::FileLocation”).Value.ToString +“\CustomerOrders_” + CStr(Format(Now(), “MMddyyyy_hhmmss”))

This code is going to append the file name generated using the current date and time to the File Location pointed by our variable FileLocation. In this way we can also control the location in which the destination file is stored by just changing the variable value. The variables are very powerful piece of SSIS architecture. They are used to alter the properties of the package at run time.

Our next step is to tell the flat file connection manager to point to this file which we generated in the earlier step. As discussed in the earlier post, in order to dynamically alter the package at run time we have to make use of the expressions page of the SSIS executable.

In our example, we have to open up the Expressions editor for the Flat File Connection Manager. To do this right click on the Flat File Connection Manager and click on the Properties option in the menu. This will open up the properties window for the connection manager. In the properties window click on the ellipse (… ) in the Expressions. This will open the Expression Editor for the connection manager. The following image shows this process.

Select the Connection String Option in the Property of the Editor and click on the ellipse of the property. This will open up the Expression Builder to edit the property value. In the Expression Builder, drag and drop the variable FileLocation. Since the FileLocation variable contains the entire file path and file name of the destination file, the connection manager now will point to that location and file. The image below shows the expression builder for the connection manager.

Click OK and go back to the Control Flow pane. This completes our SSIS package which will export the data from the AdventureWorks database to the text file which is named according our naming convention. Now execute the package by hitting F5. Now we see that the flat file with the required name is generated with the data populated from our AdventureWorks database. The following screen shot shows the successful execution of the SSIS package. Note that we changed the name of the Executables to some meaningful names rather than leaving them at default name what SSIS gives.

In this post we discussed the need of the data flow task and also looked at the configuration of the Flat File Destination and OLE DB Source. We also discussed the export of the data in the text file from the database by naming the text file dynamically based on the current date and time. In the upcoming posts we are going to look at the export of the data from any OLE DB source to other destinations like excel files.